SK11 AHM-991K Long Air Hammer, 2,100 Times/Minute

Long type air hammer for safer and more comfortable work [Use] For removing sand, removing sand, removing rust, stripping and cutting bolts and steel plates, etc. Features: The long head has a total length of 10.6 inches (270 mm), so you can work at a distance from scattered objects during work. Change tip tools such as chisel can be quickly and easily replaced with one touch without the use of tools, so you can work efficiently Features a non-slip rubber grip that holds firmly in place, so you can work comfortably in winter without getting cold. Pistol shape allows you to work in a variety of directions such as horizontal, upward, and downwards. [Precautions] Please remember to lubricate before and after use. The air tool oil washes off the sludge that is produced inside and prevents rust from the moisture contained in the input air. Failure to lubricate may cause sludge to build up in the internal rotation, or the occurrence of rust. Please protect the appropriate air pressure. Using excessive air pressure may cause damage to the main unit and cause accidents or injuries. Do not operate (empty) without touching the tip of the tool to the target part. The main unit may be damaged by the hammer inside of the product. When used with a compressor that has a discharge of over 360 L/min (atmospheric pressure conversion value) at 0.6 MPa, it can be used continuously when using a compressor, with the output volume below 0.6 MPa, the supply air pressure will gradually decrease during use, so it will be intermittent to stop working pressure below 0.6 MPa. In addition, in order to achieve the minimum performance required for work, air volume with a minimum diameter of 0.2 inch (6.5 mm) is required, but to achieve the best performance, please use a hose with a thicker inner diameter.

• Number of blows: 2,100 times per minute, Chisel shaft diameter: 0.4 inches (10 mm), Recommended air hose: Inner diameter of 0.2 inches (6.5 mm) or more
• Suitable air pressure: 0.6 MPa, Air consumption: 360 L/min (atmospheric pressure equivalent)
• Air Inlet Size: Rc 1/4 (1/4 pipe connection tapers female thread)
• Product Size: Width 10.8 inches (276 mm) x Height 6.8 inches (172 mm) x Depth 2.2 inches (57 mm); Product Weight: Approx
• Accessories: 1 point chisel, 1 R1/4 plug, air tool oil